-
Miniature stage moves quickly
P-652 piezoelectric linear-motor driven translation stage is smaller than other miniature stages and provides high speed and resolution. The stage consists of four parts and can replace classical drive elements such as rotary motor/leadscrew assemblies or electromagnetic linear motors in a microsystem. The stage measures 9.0 x 6.5 x 2.4 mm, offers a travel range of 3.2 mm, and can move at velocities up to 80 mm/s.
-
Noise-reduction device has built-in FIFO memory
ML87V2107 and ML87V21071 large-scale imaging devices operate on a single 3.3-V power supply. They are integrated into a single chip and reduce CCD camera noise in dim light. The ML87V2107 is equipped with a noise-reduction function and a frame synchronizer to adjust time axis distortion and synchronization phase of image signals. The ML87V21071 is also equipped with functions to eliminate digital cross color.
-
OptoTherm adds AVI format
Thermalyze software version 4.5, gives users the ability to create thermal imaging videos in AVI formatVideos can display thermal images, 3-D thermal images, strip charts, line profiles, histograms, as well as temperature statistical data from images. Other features include a tool to enable users to precisely locate the position of thermal anomalies with respect to a reference point.
-
Device reads Data Matrix codes
ICR840 area CMOS 2-D barcode reader is for applications that use directly marked stationary objects. It offers 3-Mpixel (1280 x 1024) resolution and integrated LED illumination for 1- and 2-D Data Matrix decoding. The ICR840 resolution can be adjusted to increase the image repeat rate above 25 Hz. The standard field of view is 45 x 35 mm. Supplementary software assistants support users during mechanical adjustment, teach-in of the code to be detected, and Ethernet connection.
-
Megapixel camera is compact
SVS1020, a 1-Mpixel camera, has resolution of 1000 ? 1000 pixels. The camera is available with monochrome and color sensors (Bayer pattern). Software tools are included with the camera to provide adjustments to the operational mode, gain, and offset. The matching frame grabber with shading correction is also offered.
-
Video stabilizer works in real time
IVS-100 video stabilizer has 12-Vdc operation and electrically corrects video shaking that occurs in camera applications. It can correct up to 40% in vertical or horizontal directions in relation to the screen. The IVS-100 provides subpixel level correction precision. It is 145 ? 40 ? 162 mm.
-
Camera has wide dynamic range
TM-1327GE, a compact, progressive-scan CCD camera, features a 2/3-in. image sensor (Sony ICX285) and the ability to capture 30 frames/s at 1.4-Mpixel resolution. Contained in a 50.8 ? 50.8 ? 84.8-mm housing, the camera offers a wide dynamic range with high sensitivity over both visible and near-IR portions of the spectrum. The camera's interline-transfer CCD permits full vertical and horizontal resolution with shutter speeds up to 1/21,000 s.
-
Color linescan lenses have F-mount
LM50CLS and LM28CLS 3CCD color linescan lenses offer focal lengths of 50 mm and 28 mm, respectively, iris range of 2.8 to 16, and minimum focus distance of 0.5 m. The lenses have 30-mm sensor coverage and a Nikon F-mount. The front filter screw size is M52 x 0.75 for the LM50CLS and M72 x 0.75 for the LM28CLS, and the maximum diameter (ratio) is f/2.8.
-
Cameras support FireWire a and b
Modular FireWire camera series supports IEEE-1394 FireWire "a" and "b" ? which provides data-transfer rates up to 80 Mbyte/s. Five models are available (monochrome and color versions) with resolutions from VGA up to 2 Mpixels. The cameras offer functions such as gain, offset, and exposure time settings, as well as binning and true partial scan (ROI) readout modes.
-
Profiler has high dynamic range
Beam profiler, the FireWire BeamPro, operates with a FireWire interface and does not require a frame-grabber card. BeamPro Model 2523 is a 2/3-in.-format (9.0--6.7 mm) CCD with 6.45-μm pixels, and Model 2512 is a 1/2-in.-format (6.5--4.8 mm) CCD with 8.3-μm pixels. The system measures both continuous-wave and pulsed beams over the wavelength range of 190--1100 nm.
eNewsletter
Magazine
