Linear CCD news and technical articles from Vision Systems Design magazine. Search Linear CCD latest and archived news and articles
performance linear lighting or for single dimensional linear CCD camera lighting. Based upon Moritex's proprietary ..... connector pins and lighting for single-dimensional linear CCD cameras. MG-Wave LED lighting provides longer stable
JANUARY 9--Sarnoff Imaging Systems (Princeton, NJ, USA; ( www.sarnoff.com ) has announced the release of its 8k linear CCD sensors for purchase. These industry-standard sensors are targeted for use in high-speed inspection applications
these cameras, each photosite of the linear CCD or CMOS array converts incoming photons ..... linescan camera, which incorporates a linear CCD with eight taps, each of which are ..... infrared (NIR) data using four linear CCD arrays (see Fig. 3). Each of
cost and size because the optics are expensive to get the best color correction.” e2v will soon introduce a quad- linear CCD linescan camera that will include a fourth sensor for either unfiltered monochrome or near-infrared. The addition
Industry-standard 8k linear CCD sensors are targeted for use in high-speed inspection applications, such as printed-circuit boards and print webs. These
especially attractive in applications such as laser triangulation where high light intensity would normally saturate a typical linear CCD or CMOS camera. Spatial resolution Determining the resolution of a camera can be one of the most important parameters
architectures to capture color images. Linescan cameras incorporating monolithic trilinear sensors consist of three parallel linear CCD elements that are also separately coated with RGB filters. In its latest ruL2098-10gc, a GigE Vision linescan camera
to Paavola, color by itself is not enough. inX chose a color sensor that uses a prism inside the 2048 × 3-pixel linear CCD camera to separate the color components of the incoming visible light signal into red, green, and blue. Using a central
control functions (see Fig. 3). Each sensor is a linear CCD array that is positioned behind a perpendicular slit ..... control functions (see Fig. 3). Each sensor is a linear CCD array that is positioned behind a perpendicular slit
parts Without using a motor or rotating prism mechanism, the LS-7000 optical micrometer uses an LED light source and a linear CCD sensor. Featuring a 2400-sample/s sampling rate and resolution of 0.01 µm, the micrometer's repeatability is