MVTec announces USB3 Vision interface for HALCON machine vision software

MVTec has announced a USB3 Vision for its HALCON machine vision software, which will provide high bandwidth in excess of 350 MB/s and a plug and play interface.

Content Dam Vsd En Articles 2013 11 Mvtec Announces Usb3 Vision Interface For Halcon Machine Vision Software Leftcolumn Article Thumbnailimage File

MVTec has announced a USB3 Vision interface for its HALCON machine vision software, which will provide high bandwidth in excess of 350 MB/s and a plug and play interface.

In addition, power and data are transferred via the same cable and software access is managed by the GenICam programming interface.

The HALCON USB3 Vision interface was officially validated by the Automated Imaging Association (AIA) test procedures and was successfully tested at the AIA’s plugfest on October 23, 2013 with Basler, Baumer, MATRIX VISION, Point Grey, and XIMEA cameras.

MVTec will showcase the new interface, along with its surface-based 3D vision technology, at SPS IPC Drives 2013.

The interface is available for HALCON 11 on Windows 7/8 (32-bit and 64-bit). To download the new HALCON USB3 Vision interface, click here.

To learn more about USB3 Vision, click here.

Also check out:
International Machine Vision Standards meeting sees a number of key developments
SPS IPC Drives 2013: All things automation
New Editorial Digest: Understanding Imaging Needs

Share your vision-related news by contacting
James Carroll, Senior Web Editor, Vision Systems Design

To receive news like this in your inbox, click here.

Join our LinkedIn group | Like us on Facebook | Follow us on Twitter | Check us out on Google +

More in Boards & Software