Controller has 1.6-GHz processor

AUGUST 14, 2009--emPC-M series controllers are powered by Intel Atom N270 processors at up to 1.6-GHz clockspeed.

Aug 14th, 2009

AUGUST 14, 2009--emPC-M series controllers are powered by Intel Atom N270 processors at up to 1.6-GHz clockspeed. The emPC-MN270 can be used as a fanless system due to its low power consumption of maximum 14 W. A pre-installed IEC 61131-3 Soft PLC system is also available. CoDeSys software is able to be supplied for any emPC system. The emPC-M series is available with Linux, Windows XP, XP Embedded, Vista, or Windows CE 5.0/6.0 operating systems.
Janz
Paderborn, Germany
www.janz.de

-- Posted by Carrie Meadows, Vision Systems Design, www.vision-systems.com

------

PRESS RELEASE

Janz expand emPC family with ATOM Processor

Janz Automationssysteme AG has expanded their embedded PC family with Intel's new series of low power ATOM Processors. The new emPC-M series controllers are powered by Intel Atom N270 Processors at up to 1.6 GHz clockspeed. The emPC-MN270 can be used as a fanless system due to its low power consumption of max. 14 W. A preinstalled IEC 61131-3 Soft PLC system is also available, making the emPC-M series a high quality control solution. Janz is member of the CoDeSys Automation Alliance (CAA) and hence is able to apply CoDeSys software with its options to any emPC system.

Janz Automationssysteme AG provides a variety of installable automation solutions which previously used standard industrial PC systems.

Due to the continued minimization of manufactured machines, the emPC-M series is an ideal, small but flexible, high performance computing system which matches the requirements of different custom solutions.

Additionally, the emPC-M series can be mounted on the back of a graphics display to become a flexible HMI system with or without touch screen. Display sizes from 12.1" until 19.0"are already available. Further information about our our emVIEW systems can be found at our website.

The emPC-M series is available with Linux, Windows XP, XPembedded, Vista or Windows CE 5.0/6.0 operating systems.

More in Boards & Software