APRIL 6, 2009--The miniaturized EPOS2 Module 36/2 is designed to control brush DC motors as well as brushless EC motors. The plug-in module offers full motion control functionalities and suits single-axis and multiple-axis applications of miniature size. It can be operated in various operational modes, as position controller but also as speed or current controller, so it can be applied wherever decentralized drive management is needed. With a size of 54 x 28 x 9 mm, performance characteristics of 36 V max and 2 A, the module is suitable as an OEM component in miniature apparatus manufacturing. The module has been developed to command and control within a CANopen network. It also can communicate via USB or RS-232 interface. Step motors can be substituted by employing the featured "Step/Direction Mode" and the "Master Encoder Mode" transforms the drive into an electronic gearbox. Control via an analog set value voltage can replace conventional servo amplifier setups.
maxon
Fall River, MA, USA
www.maxonmotorusa.com
-- Posted by Carrie Meadows, Vision Systems Design, www.vision-systems.com
------
PRESS RELEASE
Dynamic and precise: The perfect OEM drive solution
maxon motor launches new CANopen positioning module.
As an addition to the digital positioning controllers of the EPOS family, maxon motor now presents an OEM version. The miniaturized EPOS2 Module 36/2 is designed to control brush DC motors as well as brushless EC motors. This plug-in module offers full motion control functionalities and suits single-axis and multiple-axis applications of miniature size. The EPOS2 Module 36/2 is the perfect drive solution for equipment designers.
This plug-in module integrates seamlessly into customer applications. One major advantage of the position controller is its outstanding flexibility. It can be operated in various operational modes; as position controller, but also as speed controller or as current controller. This characteristic permits the use of the module in a vast range of drive systems. Thus, the EPOS2 Module 36/2 can be applied wherever decentralized drive management is needed. With its size of only 54x28x9 mm, performance characteristics of 36 Volt max and 2 Amp, the module is especially suitable as an OEM component in miniature apparatus manufacturing.
As with all products of the EPOS series, this module has also been developed to command and control within a CANopen network. It also can communicate via USB or RS232 interface. Additionally, step motors can be substituted by employing the featured "Step/Direction Mode" and the "Master Encoder Mode" transforms the drive into an electronic gearbox. Control via an analogue set value voltage can replace conventional servo amplifier setups.
maxon motor offers a comprehensive Starter Kit including an Evaluation Board for a single-axis system. Also available is documentation set to assist OEMs in motherboard design for multiple-axis systems. Documentation and software is delivered with every shipment and is also available for download on the Internet via www.maxonmotor.com.
http://www.maxonmotorusa.com or [email protected]
101 Waldron Road, Fall River, Massachusetts 02720
