LEDs line illuminators provide constant current

Oct. 30, 2008
OCTOBER 30, 2008--The MLNL series of LED line illuminators, based upon proprietary MG-Wave constant current technology, is designed for high-performance linear lighting or for single-dimensional linear CCD camera lighting.

OCTOBER 30, 2008--The MLNL series of LED line illuminators, based upon proprietary MG-Wave constant current technology, is designed for high-performance linear lighting or for single-dimensional linear CCD camera lighting. Incorporated in the LED light the MG-Wave constant-current detection system reads the signal to control the rated current that is adjusted to the number of LEDs in every lighting module. The product line also includes high-powered spot, direct ring, low-angle ring, shadowless, edge backlit, array backlit, coaxial, bar, linear, oblique, and parallel lighting LEDs as well as power sources and various accessories. Available in 6 colors, LEDs are tested and grouped into more than 100 luminance levels.
Moritex Europe
Cambridge, UK
www.moritex.com

For more related information, visit theLighting & Optics topic center.

-----

PRESS RELEASE

22nd JULY 2008

Uniform, high brightness LED line illumination...

The Moritex MLNL series of LED Line Illuminators have been designed to meet the requirements for high performance linear lighting or for single dimensional linear CCD camera lighting.

Based upon Moritex's proprietary MG-Wave constant current technology the MLNL series of LED's provide unmatched even illumination improving inspection of glass substrates for scratches and other imperfections, inspection of boards and connector pins and lighting for single-dimensional linear CCD cameras.

MG-Wave LED lighting provides longer stable images than other forms of lighting. Unlike other forms of lighting there is no deterioration caused by repeatedly switching the light on and off. Operating across a narrow bandwidth MG-Wave makes it easy to acquire the contrast critical for image processing. Incorporating small light source elements enables MG-Wave to deliver lighting dimensions optimised to application. Incorporated in the LED light the MG-Wave constant current detection system reads the signal to control the rated current that is adjusted to the number of LED's in every lighting module. Consequently MG-Wave has the flexibility to offer its industry leading performance for any type of lighting configuration.

The MG-Wave range also includes high powered spot, direct ring, low angle ring, shadowless, edge backlit, array backlit, coaxial, bar, linear, oblique and parallel lighting LED's as well as power sources and a wide variety of LED lighting accessories.

Available in 6 colours Moritex LEDs are tested and grouped into over 100 luminance levels. The LED's that go into Moritex units are always from the same group ensuring even light output even in larger units. Before leaving the factory all MG Wave LED units are tuned to the same standard performance ensuring consistency between units.

For further information on MLNL series LED Line Illuminators please contact Moritex.

-----------

European HQ

Moritex Europe Ltd.
14, Signet Court
Swanns Road
Cambridge CB5 8LA
UK

tel. +44-1223-301148
email [email protected]
web www.moritex.com

Voice Your Opinion

To join the conversation, and become an exclusive member of Vision Systems Design, create an account today!