Smart Vision Lights' spotlights offer a broad range of available wavelengths

Smart Vision Lights' SA30 adjustable Prox Lights are adjustable tight-focus spotlights with integrated optics.

Oct 31st, 2012
Smart Vision Lights' spotlights offer a broad range of available wavelengths
Smart Vision Lights' spotlights offer a broad range of available wavelengths

SA30 adjustable Prox Lights are adjustable tight-focus spotlights with integrated optics that allow the spot size to be increased or decreased by extending or retracting the light's outer barrel. Once the appropriate size is achieved, a set screw is tightened to hold the barrel at the position, allowing adjustment of the spot as necessary. The illumination sources are available in white, 625-nm red, 530-nm green, 505-nm cyan, 470-nm blue, 850- and 940-nm infrared (IR), and 365- and 395-nm ultraviolet (UV) lights.
Smart Vision Lights
Muskegon, MI, USA

-- Posted by Vision Systems Design

View More Vision+Automation Products

Locate a vendor or system integrator in our Online Buyer's Guide

---

NEW PRODUCT PRESS RELEASE

New SA30 Focusable Prox Light

Smart Vision Lights is proud to announce the release of its latest product offering. The SA30 is an adjustable tight focus spot light. Integrated optics allow for the ability to increase or decrease the size of this tight focused spot by simply extending or retracting the outer barrel of the light. Once the ideal size spot is achieved, a set screw is tightened to hold the barrel in place. This gives the user the flexibility to adjust the spot as needed. SA30 Adjustable Prox Lights are available in white, 625nm red, 530nm green, 505nm cyan, 470nm blue, 850nm & 940nm infrared, 365nm & 395nm ultraviolet.

Data Sheet:
SA30 Series PROX Light Adjustable Focus

Features

Optics provide tight focused adjustable spot light
- 30mm Style Housing
- M12 Quick Disconnect
- Driver built in – No External wiring to a driver
- PNP and NPN Strobe input
- Continuous operation or Strobe mode
- Dimmable via built in potentiometer
- Analog intensity via 0-10VDC signal

Electrical Input: Voltage: 24 VDC +/- 10%
Strobe Input: PNP -> +4VDC or greater to activate / NPN -> GND (<0.7VDC) to activate
Current: Max 250mA draw
Yellow Indicator LED: ON = LED active
Green Indicator LED: ON = Power
Potentiometer: 10 turn pot – Intensity control of 10% to 100% Clockwise decreases intensity
Analog Intensity: The output is adjustable from 10 -100% of brightness by a 0 -10 VDC signal

Related Accessories
30mm sensor mounts / PB30-M2 / PB30-M3
Power Cables / 5PM12-5 / 5PM12-10 / 5PM12-15 / W5PM12-15
T1 Power Supply
Diffuser/Polarizer Kit / S30-DKIT-LP

Part Number Key:
SA30 – XXX
Product Family: Color:
Linear Light SA30 365, 395, 470, 505, 530, 590, 625, 850, 940 & WHI (White)

CE and RoHS Compliant

Additional wiring information can be found at: http://www.smartvisionlights.com/wp-content/uploads/pdf/SA30_spec_sheet_2012.pdf

SOURCE: Smart Vision Lights

More in Cameras & Accessories