Interface/user-programmable FPGA are combined

CAML-MOD3 is a Camera Link adaptor module for the company's Xilinx Virtex II Pro-based PMC-FPGA03 PMC module. Capable of capturing video from two Base-mode cameras or one Base-, Medium-, or Full-mode camera, the CAML-MOD3/PMC-FPGA03 merges data acquisition with a local user-programmable FPGA that can implement functions such as edge detection, FFTs, digital filtering, and correlation.

Feb 3rd, 2006

CAML-MOD3 is a Camera Link adaptor module for the company's Xilinx Virtex II Pro-based PMC-FPGA03 PMC module. Capable of capturing video from two Base-mode cameras or one Base-, Medium-, or Full-mode camera, the CAML-MOD3/PMC-FPGA03 merges data acquisition with a local user-programmable FPGA that can implement functions such as edge detection, FFTs, digital filtering, and correlation. The CAML-MOD3 uses the Mini Camera Link (MiniCL) HDR26 connector standard and is compatible with traditional Camera Link equipment using the MDR26 connector. The module supports a clock rate of 85 MHz, allowing real-time transfer of sustained data rates up to 680 Mbytes/s into the FPGA (Full mode). A 64-bit PCI interface supplies the bandwidth necessary to transfer processed or raw video to the PMC host carrier.
VMETRO
High Wycombe, UK
www.vmetro.com

More in Cameras & Accessories