EPIX Camera Link frame grabber plugs into notebook

May 3, 2010
The PIXCI ECB1-34 Base Camera Link frame grabber from EPIX plugs into an ExpressCard/34 or ExpressCard/54 slot in a notebook computer.

PRESS RELEASE

The PIXCI ECB1-34 Base Camera Linkframe grabber from EPIX (Buffalo Grove, IL, USA) plugs into an ExpressCard/34 or ExpressCard/54 slot in a notebook computer. With 200 megabyte per second sustained data transfer rates, and burst transfers up to 250 megabytes per second, almost all Base Camera Link cameras are supported.

The PIXCI ECB1-34 captures from linescan or area-scan cameras operating in either free-run or controlled mode. Controlled mode can use an optional TTL trigger input cable. The ECB1-34 generates a programmed width exposure signal to the camera for each trigger input. An optional TTL strobe output cable is available for strobed applications.

The PIXCI ECB1-34 frame grabber priced at $595.00 includes the XCAP-Lite imaging program, and offers dedicated camera control dialogs supporting hundreds of the newest, most advanced, highest-bandwidth machine-vision cameras.

Link: http://www.epixinc.com/products/pixci_ecb1-34.htm

PRODUCT INFORMATION
Charles Dijak
EPIX, Inc.
Tel: 847.465.1818
Fax: 847.465.1919
[email protected]

-- Posted by Vision Systems Design

Voice Your Opinion

To join the conversation, and become an exclusive member of Vision Systems Design, create an account today!