Simulator mimics Camera Link cameras

PROC_CamSim automatically generates Camera Link images without the use of real cameras. The system consists of the CamSim host-based software application, an FPGA board, and Camera Link driver daughter board. It simulates the behavior of any Camera Link camera.

PROC_CamSim automatically generates Camera Link images without the use of real cameras. The system consists of the CamSim host-based software application, an FPGA board, and Camera Link driver daughter board. It simulates the behavior of any Camera Link camera; outputs 1- to 8-pixel channels simultaneously at 70- to 85-MHz pixel clock; and supports continuous linescan mode. The GUI-based CamSim software configures all the simulation parameters, including timing and resolution and Camera Link channel structure.
GiDEL
Or Akiva, Israel
www.gidel.com

More in Cameras & Accessories