Dome LED lighting improves inspection

April 23, 2007
MG-Wave dome-type LED light sources are designed to evenly illuminate object surfaces by reflecting on the dome inbound light fibers arranged at 360° angles along the lower section of the dome. The LEDs improve inspection of curved metal surfaces, as well as printed surfaces such as the bottom of aluminium cans. Two sizes are available, each in four wavelengths: red, green, blue, and white.

MG-Wave dome-type LED light sources are designed to evenly illuminate object surfaces by reflecting on the dome inbound light fibers arranged at 360° angles along the lower section of the dome. The LEDs improve inspection of curved metal surfaces, as well as printed surfaces such as the bottom of aluminium cans. Two sizes are available, each in four wavelengths: red, green, blue, and white. Operating across a narrow bandwidth makes it easy to acquire the contrast critical for image processing. MG-Wave constant current detection system reads the signal to control the rated current that is adjusted to the number of LEDs in every lighting module.
Moritex
Cambridge, UK
www.moritex.com

Voice Your Opinion

To join the conversation, and become an exclusive member of Vision Systems Design, create an account today!