Vision-guided motion controller is small

May 1, 2008
Guidance 1400 series, a line of 44 × 83 × 133-mm, vision-guided multiaxis motion controllers based on a distributed network architecture, allows the controller to be located at the point of use. Each Guidance 1400 controller contains four motor drivers, encoder input channels, a 700 MIPS processor, digital inputs and outputs, Ethernet, and RS-232 interfaces. It can output motor bus voltages from 24 to 48 Vdc and up to 500 W of total motor power.

Guidance 1400 series, a line of 44 × 83 × 133-mm, vision-guided multiaxis motion controllers based on a distributed network architecture, allows the controller to be located at the point of use. Each Guidance 1400 controller contains four motor drivers, encoder input channels, a 700 MIPS processor, digital inputs and outputs, Ethernet, and RS-232 interfaces. It can output motor bus voltages from 24 to 48 Vdc and up to 500 W of total motor power. The user interface is based on a Web server that resides in the Guidance 1400, allowing the controller to be accessed from anywhere in the world.
Precise Automation
Los Altos, CA, USA
www.preciseautomation.com

Voice Your Opinion

To join the conversation, and become an exclusive member of Vision Systems Design, create an account today!