I/O module eliminates motion controller

New module provides stepper-motor and servo-drive control in a compact 12-mm-wide package. Designated the 750-670, it supports two pulse-output patterns, step/direction, or incremental encoder, which are configured via a function block in the company's IEC 61131-3 programming tool. Communication with the stepper or servo drive is established via an RS-422 interface and controlled by a variable output frequency (0 to 500 kHz).

Jun 7th, 2006

New module provides stepper-motor and servo-drive control in a compact 12-mm-wide package. Designated the 750-670, it supports two pulse-output patterns, step/direction, or incremental encoder, which are configured via a function block in the company's IEC 61131-3 programming tool. Communication with the stepper or servo drive is established via an RS-422 interface and controlled by a variable output frequency (0 to 500 kHz). The 750-670 is also 100% compatible with all other 750 Series modules, allowing the combination of digital, analog, and special function signals in the same fieldbus node.
WAGO Corporation
Germantown, WI, USA
www.wago.us

More in Factory