Janz Optipanel and Comfort-Panel are available with 12- or 15-in. display on base mounting or with support arm

Janz offers complete integrated system solutions for 12 inch and 15 inch emVIEW systems (display and Panel PC).

Content Dam Etc Medialib New Lib Vision Systems Design Online Articles 2010 09 81996

PRESS RELEASE

System housing with IP65 safety class

Janz (Paderborn, Germany) offers complete integrated system solutions for 12 inch and 15 inch emVIEW systems (display and Panel PC). Other sizes are available on request.

The displays and Panel PCs from the emVIEW family can be built into Rittal Comfort-Panel and Optipanel system housings. The solutions are also suitable for support arm and base mounting.

Customers can therefore ideally operate or observe a machine using this flexible system solution of placing the display panel in an optimal position. Whether an operator is sitting or standing – all system elements are able to rotate, tilt, swivel, raise and lower. Through exact matching of user requirements, operation can be adjusted to the best ergonomic requirements. The keyboard housing can be directly mounted at the display panel position, with a choice of two installation depths. The back of the PC housing is bolted and hinged with cam locks or quick release buckles. Both solutions are suitable for installation in a support-arm or pedestal system. In fact, depending on system configuration, arm length and body weight, there are four different systems for mounting arms. For the pedestal system, diverse solutions are possible for every housing type, height adjustment, mobile application and cable placement.

You will get further information at the websites of Janz Automationssysteme AG at http://www.janz.de/as/emview/optipanel.html and http://www.janz.de/as/emview/comfort-panel.html.

Janz Automationssysteme AG
Im Doerener Feld 8; 33100 Paderborn; Germany
Phone: +49.(0)5251.1550-0; Fax: +49.(0)5251.1550-190
E-Mail: mailas@janz.de

-- Posted by Vision Systems Design

More in Automotive Manufacturing