Optical system replaces multicamera setup
SEPTEMBER 16, 2009--The Within 360° machine-vision system inspects for defects within the walls of internal holes. Its optical setup allows users to inspect the 360° surface of the internal wall utilizing a single camera to capture a single image to process any defects. Typically multicamera systems are needed to cover the full 360° view of the threaded walls during inspection or parts need to be rotated in a single-camera system. Within 360° is a noncontact system with no moving parts and no space constraints. It is available at a lower cost than a multiple-camera solution and offers faster processing speed with a single image and no stitching required.
VisionXtreme
Singapore
www.vxgp.com
------
PRESS RELEASE
Within 360°
VisionXtreme offers a revolutionary machine vision solution, Within 360°, to inspect for defects within the walls of internal holes. Its optical setup allows users to inspect the 360 degree surface of the internal wall utilising one single camera to capture a single image to process any defects.
Typically, multi-cameras are needed to cover the full 360 degree-view of the threaded walls during inspection. Alternatively, parts need to be rotated if a single camera system is employed. Due to space constraint and inspection speed requirement, such methods greatly complicate the inspection systems in production machines. VisionXtreme's Within 360° optical system eliminates the complexity and costly requirement faced by today's productions.
Advantages:
* Single camera, single image for acquisition of entire internal hole
* Non-contact and no moving parts
* Random orientation of parts
* No space constraint
* Lower cost vs multiple camera solution
* Faster processing speed (single image, no stitching required)
Applications:
* Inspecting internal thread
* Inspecting internal hole surfaces
* inspecting blind holes
Standard Models
Internal Hole
Diameter For
Threaded Part Depth
W360-0816
8mm - 16mm
M10 - M18
Up to 16mm
W360-0511
5mm - 11mm
M6 - M12
Up to 11mm
* Optical assembly does not come with lightheads. For lighthead options or other vision solution requirements, please contact VisionXtreme Pte Ltd at (65) 6392-0990 or by email to [email protected].
About the company
VisionXtreme, a subsidiary of the Singapore Exchange Mainboard-listed, ASTI Holdings Limited, is driven by more than 20 years of vision experience. The ASTI Group has a strong patents portfolio of more than 100 patents.
The core strength of VisionXtreme lies in the niche field of identifying cosmetic defects for different devices. Our inspection solutions can be performed for a variety of devices used in various industries, such as: semiconductor, electronics, pharmaceutical / medical, food & beverage, fasteners, etc.
To understand further about the company, do visit http://www.vxgp.com