DECEMBER 16, 2008--Standard planetary and spur gearheads are available in more than 600 variations with diameters ranging from 6 to 81 mm. Custom-made products are also available, such as a special planetary gearhead with two speeds on the output side. The motor shaft goes through the gearhead, resulting in two speeds with a mechanically fixed reduction ratio. Worm gearheads, spindle drives, and special spur gearheads are also available.
maxon
Fall River, MA, USA
www.maxonmotorusa.com
------
PRESS RELEASE
6mm to 81mm Precision Gearheads
Fall River, MA - A custom-made maxon precision gearhead is the ideal solution for a motor that is powerful enough for motion, but has too high a speed and too low a torque. Maxon precision motors offers an extensive line of standard planetary and spur gearheads in over 600 variations with diameters ranging from 6mm to 81mm.
maxon offers custom-made solutions, such as the special planetary gearhead with two speeds on the output side. The motor shaft goes through the gearhead, resulting in two speeds with a mechanically fixed reduction ratio. maxon also produces worm gearheads and spindle drives in addition to special spur and planetary gearheads.
Look for maxon's gearheads and compete line of DC brush and brushless motors, encoders and control electronics at www.maxonmotorusa.com.
http://www.maxonmotorusa.com
101 Waldron Road, Fall River, Massachusetts 02720
