Opto Engineering releases two new strobe controllers
The LTDVE4CH-20 and LTDVE8CH-20 strobe controllers can set the pulse duration and delay of each connected illuminator in steps as low as 1 µs.
The LTDVE4CH-20 and LTDVE8CH-20 strobe controllers, that can control four and eight LED channels respectively, can set the pulse duration and delay of each connected illuminator in steps as low as 1 µs, with a maximum output current up to 20 A pulsed and 20 A continuous.
Both models are equipped with Ethernet and RS485 interfaces, and can be configured via Web browser, or Modbus/TCP or Modbus/UDP slave protocol. A communication library is available with C source code, and firmware can be customized upon request.
To Learn More:
Contact: Opto Engineering
Headquarters: Mantova, Italy
Product: LTDVE8CH-20 and LTDVE4CH-20 strobe controllers
Key Features: Pulse duration and delay set as low as 1 µs, 20 A pulsed and 20 A continuous max. output current, Ethernet and RS485 interfaces.