DENSO to showcase robots and robot controller at NI Week

DENSO Robotics will showcase its VS-Series six-axis robots and RC8 controller at NI Week from August 5-8 in Austin, Texas.

Content Dam Vsd Online Articles 2013 07 Denso New Vs Robot 5in Copy

DENSORobotics will showcase its VS-Series six-axis robots and RC8 controller at NI Week from August 5-8 in Austin, Texas. The VS-Series robots offer cycle times from 0.33 to 0.37 seconds and repeatability from ±0.02 to ±0.03 mm. The robots have reaches from 500 to 900 mm and payload capacities from 4 to 7 kg. The RC8 controller is only 12 by 18 inches with a height of 3.75 inches and features a comprehensive menu and improved usability that reduce the time required to implement a robot. DENSO will showcase how its robots can be integrated into existing systems without having to learn a new programming language.

NI Week booth number:339

To Learn More:

Contact:DENSO Robotics
Headquarters
: Long Beach, Calif., United States
Product:
VS-Series robots and RC8 controller.
Key Features:
Cycle times from 0.33 to 0.37 seconds, reaches from 500 to 900 mm, payload capacities from 4 to 7 kg (VS-Series), 12 by 18 inches with a height of 3.75 inches, comprehensive menu and improved usability (RC8).

What DENSO says:
View more information on the VS-Series robots.
View more information on the RC8 controller.

View More Products
Locate a vendor or system integrator in Vision System Design’s Buyer's Guide

Share new products that you think are particularly interesting or helpful by contactingJames Carroll, Senior Web Editor, Vision Systems Design.

More in Factory