Factory Automation

Vision system tracks webs ETS2 Web Edge tracker is a vision-based system that senses and locates

Vision system tracks webs ETS2 Web Edge tracker is a vision-based system that senses and locates web and coating edges as the web travels over a roller. The ETS2 uses DSP techniques to enhance and extract edge locations that may be fed into a web steering-control system to control edge positions. Either one of two units may be used to measure web or slit width. The output edge-control signal is scaled to the range of 0 to 10 Vdc or 4 to 20 mA. A serial communication link is also provided. Adap
Sept. 1, 1997

Vision system tracks webs ETS2 Web Edge tracker is a vision-based system that senses and locates web and coating edges as the web travels over a roller. The ETS2 uses DSP techniques to enhance and extract edge locations that may be fed into a web steering-control system to control edge positions. Either one of two units may be used to measure web or slit width. The output edge-control signal is scaled to the range of 0 to 10 Vdc or 4 to 20 mA. A serial communication link is also provided. Adaptive Systems, POB 26397, St. Paul, MN 55126; (612) 483-4880; Fax: (612) 483-1913.

Sign up for Vision Systems Design Newsletters

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vision Systems Design, create an account today!