• Back Issues >
  • Vision Systems Design >
  • Volume 27, Issue 6
  • Volume 27, Issue 6

    Mc Loone Head Shot 720

    Editor’s Note: Bringing Success to Customers

    Nov. 14, 2022
    “The only way to be a successful company is to have successful customers."

    On Vision: That’s A “Wrap”!

    Nov. 10, 2022
    A look back at the 2022 machine vision market and technology landscape and where we might be headed.
    Courtesy of Chromasens
    AirCarbon III detects the types of defects in carbon fibers.

    Automated Inspection System Detects Defects in Carbon Fibers

    Nov. 7, 2022
    OptiMa detects protruding filaments, lint, and similar foreign bodies and distinguishes the types of defects in carbon fibers.
    Vsd110422 Edmund
    Cameras and Accessories

    How Lens Design and Tolerances Affect Imaging Performance

    Nov. 4, 2022
    Each component of an imaging system, including the optical imaging lens; machine vision camera; and illumination source, to name a few, contribute to the level of complexity the...
    Courtesy of JAI.
    The OCR inspection system could be customized for products other than semiconductor wafers.

    OCR System Reads Codes on Semiconductor Wafers

    Nov. 2, 2022
    The OCR system will be installed at strategic locations throughout the factory to read the codes as wafers move from one step in the fabrication process to the next.

    More content from Volume 27, Issue 6

    Figure 1: The company does not ship a repair unless it can fully test the item, including the I/O, communications, and overall function using OEM software and external components. (Photo courtesy of American Industrial.)
    Cameras and Accessories

    Camera Repair vs. Camera Replacement

    Oct. 31, 2022
    American Industrial is currently set up to repair cameras from 16 manufacturers. The company won’t ship a repair unless it can fully test the item.
    Figure 1: The AT 3D sensor scans the curvature of the can lid and generates a 3D point cloud from it. (Photos courtesy of AT - Automation Technology.)
    Cameras and Accessories

    3D Scanner/Software Combination Inspects Beverage Cans

    Oct. 19, 2022
    A global beverage manufacturer needed to inspect the pressure of cans to improve quality management and decrease short downtimes during the filling process because of, for example...